Glass brick wall is very easy to understand actually, the design that USES glass place to become namely a kind of wall body, this kind of wall can be used extensively in all sorts of places commonly, and glass brick still has cent hollow and solid two kinds. Although it is wall body, but it does not have the load-bearing function of wall body, but there are some other functions of wall body, and more beautiful, below we will understand the advantages of glass brick wall, and the construction of glass brick wall process specification.
Advantages of glass brick walls
1. Energy conservation and environmental protection are reasonably priced
? Vitreous brick wall place USES in the place material won't be doped normally harmful material, also do not have a few radioactive material that ceramic stone material place has, avirulent and harmless, pollution-free, have no peculiar smell, have no excitant, do not form any infringement to human body. Vitreous brick has a variety of advantages, rare is the price is not expensive, material adds construction with current price level to calculate vitreous brick structure is in 300 yuan or so, this is opposite other adornment material is not expensive.
2. Light transmission and sound insulation
The advantage that this material has is actually a lot of material do not have, and what so have also can compare bad, for instance vitreous brick has the characteristic of this respect of high daylighting performance, he still can make the light passes diffuse scattering, let whole room be full of soft close light, solved the uncomfortable feeling that sunshine point-blank causes. The single-layer glass brick structure can meet the requirements of sound insulation grade 5, and the double-layer glass brick walls with spacing less than 50mm can meet the requirements of sound insulation grade 6. As a penetrating sound insulation material, whether used in noisy roads or around the factory, can achieve good sound insulation effect.
3. Dustproof, moisture-proof and dew proof
Still have the advantage from vitreous brick on these 3 respects namely for, metropolis is better than average double layer glass, and vitreous brick is on preventing atomization, also can have outstanding effect. For example, in the case of indoor temperature of 20 degrees Celsius and humidity of 60%, the outdoor temperature does not atomize even when the temperature is minus 2 degrees Celsius, because of the heat insulation performance, energy saving, and because of the non-atomization and create a cool atmosphere.
Technical specifications for the construction of glass brick walls
One: construction technology
1. Material preparation before construction: glass brick, cement, sand, admixture, steel bar, silk felt, channel steel, metal profile frame, etc.
2, the white cement, fine sand, building glue, water in accordance with 10:10:03:3 ratio mix into mortar.
3. Install "+" type or "T" type positioning bracket.
4. Build glass bricks with mortar, from bottom to top, layer by layer.
5. After laying bricks and mortar = remove the excess plates on the positioning bracket.
6, with greasy knife joint, and remove excess mortar.
7, timely wipe the mortar on the glass brick with a damp cloth.
Two: construction acceptance standards
1, the type of glass brick used, performance, design, color to meet the requirements.
2. The product shall have the qualification certificate and the product quality qualification certificate.
3. The drawbar embedded in the partition masonry shall be firmly connected with the body structure and in the correct position.
4, masonry to be firm, end members and adhesive to be firm.
5, the surface should be consistent color, beautiful, flat, clear.
6, horizontal horizontal vertical partition, glass brick without cracks, defects.
7. Check the verticality, surface flatness, seam difference, seam straightness and Angle ruler.